The Dodge Charger was a mid-size automobile produced by Dodge. The 1966-1974 Chargers were based on the Chrysler B platform. The 1975-1978 Chargers were based on the Chrysler Cordoba. In the early sixties many automobile manufacturers were exploring new ideas in the personal luxury and specialty car segments. Chrysler slow to enter the specialty car market and the Dodge Division was selected to enter an untapped market for a bigger model to fit between the "pony car" Ford Mustang and the "personal luxury" Ford Thunderbird. The intention was to use the B-body for a sporty car with fastback look while sharing as much of existing hardware as possible. Burt Bouwkamp, Chief Engineer for Dodge during the 1960s and one of the men behind the Dodge Charger, related his experience during a speech in July 2004.
Lynn Townsend was at odds with the Dodge Dealers and wanted to do something to please them. So in 1965 he asked me to come to his office - for the second time. He noted that one of the Dodge Dealer Council requests was for a Barracuda type vehicle. The overall dealer product recommendation theme was the same - we want what Plymouth has. The specific request for a Mustang type vehicle was not as controversial to Lynn. His direction to me was to give them a specialty car but he said 'for God's sake don't make it a derivative of the Barracuda': i.e. don't make it a Barracuda competitor.
So the 1966 Charger was born.
"We built a Charger 'idea' car which we displayed at auto shows in 1965 to stimulate market interest in the concept. It was the approved design but we told the press and auto show attendees that it was just an "idea" and that we would build it if they liked it. It was pre-ordained that they would like it."
2011 Dodge Charger - First Test
Dodge was not satisfied with the results of the Charger 500. The car was not enough to beat the other aerocars on the NASCAR circuit. After months of research and development, including the aftermarket shop Creative Industries Inc., the Dodge Charger Daytona was introduced on April 13, 1969. Within hours of its unveiling, Dodge had received over 1,000 orders, despite the price point of $3,993.00 MSRP. Chrysler made many attempts at improving the aerodynamics of the 500 by adding noses rumored to be up to 23 in (580 mm) long. The Charger Daytona finally received an 18 in (460 mm) nose. The full size Charger Daytona was tested with an 18 in (460 mm) nose at the Lockheed-Martin Georgia facility. The test was a success and the project was greenlighted. The nose piece was only part of the innovation. The Charger Daytona also received a 23 in (580 mm) tall wing in rear. This wing was bolted through the rear quarter panels and into the rear subframe. The Charger Daytona's wing also helped out in an unintended way, by giving the car directional stability as well. The Charger Daytona engineering model was tested on the Chelsea, Michigan Chrysler Proving Grounds on July 20, 1969. Driven by Charlie Glotzbach and Buddy Baker, it was clocked at 205 mph (330 km/h) with a small 4-bbl. carb. The Charger Daytona's nose made 1,200 pounds of downforce and the wing made 600 pounds of downforce. (a zero lift car) The Dodge styling department wanted to make changes to the Charger Daytona as soon as they saw it, but was told by Bob McCurry to back off; he wanted function over finesse. The Charger Daytona introduced to the public had a fiberglass nose without real headlamps and a wing without streamlined fairings. The media and public loved the car, but were mystified by the reverse scoops on the front fenders. The PR representatives claimed it was for tire clearance. Actually, they reduced drag 3%. The Charger Daytona came standard with the 440 Magnum Engine with 375 hp (280 kW) and 480 lb·ft (650 N·m) of torque, A727 Torqueflite Automatic Transmission, and a 3.23 489 Case 8 3/4 Chrysler Differential. The Charger Daytona also came with the 426 Hemi with 425 hp (317 kW) and 490 lb·ft (660 N·m) (620 hp (460 kW) at 6000 rpm and 620 lb·ft (840 N·m) at 4700 rpm) for an extra $648.20. The 426 Hemi was also available with the no cost option of the A833 4-Speed Manual. Only 503 Charger Daytonas were built, 433 were 440 Magnum 139 4-Speed and 294 Torqueflite; 70 were 426 Hemi power, 22 4-Speed and 48 Torqueflite. In the end, the Daytona was brought down by the decision to make the 1970 Plymouth Superbird the only 1970 aerocar, however apparently two Charger Daytonas were built using 1970 sheet metal. While Daytonas were raced through the 1970 season, only one Daytona still raced until 1971 (in the 1971 Daytona 500) when NASCAR decreed that engine displacement of wing cars would be limited to 305 ci. That particular car, driven by Dick Brooks finished in seventh place.
In 1971, the all-new third generation Charger debuted. It was completely restyled with a new split grille and more rounded "fuselage" bodystyle. The interiors now looked more like those of the E-body and were now shared by the Plymouth B-body. Hidden headlights were no longer standard, they were now optional. A rear spoiler and a "Ramcharger" hood made the option lists for the first time. A special scoop was mounted in the hood, directly above the air cleaner. If the driver wanted to draw clean air directly into the carburetor, he flipped the vacuum switch under the dash and the scoop popped up. The Plymouth Road Runner used this device and called it the "Air Grabber" hood . This device had been used on the Coronet R/T and Super Bees, but this was the first time it was used on the Charger. Dodge also merged its Coronet and Charger lines. From 1971, all four-door B-bodies were badged as Coronets and all two-door B-bodies as Chargers. This change would add the one-year-only Charger Super Bee to the Charger stable. From 1971–1974, Charger models used the Coronet's VIN prefix of "W". Beginning in 1975, the Dodge Charger was based on the Chrysler Cordoba. The Charger SE (Special Edition) was the only model offered. It came with a wide variety engines from the 318 cu in (5.2 L) "LA" series small block V8 to the 400 cu in (6.6 L) big block V8. The standard engine was the 360 cu in (5.9 L) small block. Sales in 1975 amounted to 30,812. Because of the extreme squareness of the bodystyle, NASCAR teams were forced to rely on the previous years (1974) sheetmetal for race-spec cars. In order for Dodge to be represented, NASCAR allowed the 1974 sheetmetal to be used until January 1978, when the new Dodge Magnum was ready for race use. In 1976 a Dodge Charger was one of two NASCAR stock cars to compete in the 24hrs at LeMans, having been modified with head-lamps, tail-lamps and windshield wipers. It was driven by Herschel and Doug McGriff and sponsored by Olympia Beer, earning the nickname "Oly Express". In 1976, the model range was expanded to four models; base, Charger Sport, Charger SE and the Charger Daytona. The base and Sport models used a different body than the SE and Daytona, and were essentially a rebadging of what had been the 1975 Dodge Coronet 2-door models — and available with a 225 cu in (3.7 L) Slant Six, which was not offered on the SE and Daytona. The Charger Daytona was introduced as an appearance package with either the 360 or 400 engine. Sales increased slightly to 65,900 units in 1976. In 1977, the base Charger and Charger Sport were dropped as this body style became part of the newly named B-body Monaco line, and only the Charger SE and Charger Daytona were offered. Sales dropped to 36,204. In 1978, only about 2,800 Chargers were produced, after which it was replaced by the similar 1978 Dodge Magnum.
The Dodge Ram (currently known as the Ram in the United States and Canada) is a full-size pickup truck manufactured by the Chrysler Group LLC. As of late 2010, it has been sold under the Ram Trucks brand. Previously, Ram was part of the Dodge lineup of light trucks. The name Ram was first used in 1981 on the redesigned Ram and Power Ram following the retiring and rebadging of the Dodge D Series pickup trucks. The truck is named for the Ram hood ornament that first adorned Dodge cars in the 1930s. The Ram Truck is in its fourth generation as of the 2009 model year. Dodge Ram trucks have been named Motor Trend magazine's Truck of the Year three times; the second-generation Ram won the award in 1994, the third-generation Ram Heavy Duty won the award in 2003, and the fourth-generation Dodge Ram Heavy Duty won in 2010. The Ram is currently built at the Saltillo Truck Assembly in Saltillo, Coahuila, Mexico and at the Warren Truck Assembly in Warren, Michigan, United States.
The Ram 100 model designation was dropped and these models folded back into the "150" range for 1990 due to the introduction and sales success of the Dodge Dakota pickup. Additionally, the instrument cluster was slightly revised; the ammeter was replaced by a voltmeter while maintaining the 3-pod arrangement of the speedometer and gauges.The grille was redesigned for 1991 but kept the large rectangular headlamps and crossbar appearance. The engines were substantially upgraded for 1992 (3.9L and 5.2L) and 1993 (5.9) with multi-port fuel injection, new manifolds and higher compression cylinder heads for noticeably higher output. These newly-revised engines were marketed under the "Magnum" name. A heavy-duty overdrive Torqueflite automatic transmission called the A518 was offered with the 5.2 L and 5.9 L engines. As part of Chrysler's overhaul of corporate transmission nomenclature, the A500 and A518 were redesignated 42RH and 46RH, respectively, in 1992. The initial "4" signified a 4-speed transmission, the second digit identified the transmission's relative torque capacity, the letter "R" in the third position denoted a rear-wheel drive transmission, and the final letter "H" signified hydraulic shift control. The 3-speed automatic remained available; the A727 was redesignated 36RH, and the A904, A998, and A999 became the 30RH, 31RH, and 32RH. During this time, Dodge reintroduced the Club Cab, which was equipped with fold-out jump seats. Entry was made through the passenger or drivers doors as there were no rear doors for this configuration.The Ram line was redesigned for 1994. The exterior styling was the result of design concepts by chief designer Phillip E. Payne, plus extensive customer research that revealed that full-sized pickup buyers were enamored of a strong exterior design that suggested the "look of a big rig truck". Dodge Truck Product Planners recognized that while some customers would not identify with the unique design, it would mandate instant recognition for the new Dodge full-sized pickup. It featured a big rig-looking front end and a large grille and was nothing like Ford, or Chevy/GMC pickup in design. Engine offerings continued over from the first-generation ram and were the 3.9 L V6, 5.2 L V8, 5.9 L V8, and 5.9 L I6 Cummins Turbo diesel. Added to the line up was a new 488 cubic inch 8.0L V10 engine designed as an alternative for those who wanted superior pulling power but didn't want a diesel. The new V10 and Cummins Turbo diesel could only be had in the 2500 and higher designation models. Models were now the 1500 half-ton, 2500 three quarter-ton, and 3500 dual rear wheel one-ton in both 2 and 4 wheel drive. 1500 Rams offered both 6 and 8-foot (1.8 x 2.4 m) boxes. 2500 Rams offered 6-foot (1.8 m) boxes only with quad cabs. 3500 Rams were only made with 8-foot (2.4 m) boxes.
The Ram comes standard with four-wheel anti-lock disc brakes, side curtain airbags, and an electronic stability program or ESP. In IIHS crash tests, the Ram received a Good overall score in the frontal crash test, and a Marginal score in the side impact test. It received a 5-star frontal crash test rating from the NHTSA.Dodge Ram R/T is a concept truck with a blue body, 22-inch forged wheels, SRT stripes, and a new front bumper with chin spoiler. It was unveiled in 2008 at the SEMA show. Production of the Dodge Ram R/T began for the 2009 model year.Dodge announced a hybrid version of the Ram, dubbed the Contractor's Special, in 2003. However, the schedule for delivery slipped as Dodge backed away from the vehicle. The hybrid Ram was available only for fleet purchasers (if at all) and did not enter mass production. It offered an AC electrical outlet panel for running an entire job site worth of power tools, but the through-the-road method of balancing the gas engine and electric motor reportedly did not work as desired. Dodge has announced that it would use a hybrid transmission developed jointly with General Motors and BMW.
