This is achieved simply by cutting away the bottom collar using a sharp scalpel. When the lock and rubber grip part are inserted into the lock cylinder, the protrusion should be less than 1 cm, as can be seen here in the diagram. Modifying the glove compartment lock was a defiant move on my part to show the Vehicle Inspectorate that this Beetle owner will not be intimidated.
Showing posts with label Volkswagen Manuals. Show all posts
Showing posts with label Volkswagen Manuals. Show all posts
Saturday, April 3, 2010
Owners Guide � Glove Compartment Lock Modification Volkswagen Beetle.pdf
Monday, March 15, 2010
Volkswagen Passat B6 - Wheel bearings, assembly overview

Short Description
Wheel bearings, assembly overview
- Multi-point socket head bolt
- Tip of bolt must point in direction of travel
- Left Front ABS Wheel Speed Sensor G47 / Right Front ABS Wheel Speed Sensor G45
- Can be checked in Guided Fault Finding using Vehicle Diagnosis, Testing and Information System VAS 5051
Website: volkswagen.msk.ru | Filesize: 271kb
No of Page(s): 9
Content
�
- Remove brake disc.
- Remove shield from wheel bearing housing.
- Loosen tie rod end nut, do not remove.
To protect threads, leave nut on stud a few turns.
�
- Press off tie rod end from wheel bearing housing using ball joint puller 3287A , and then remove nut.
- Press drive axle out of hub as far as possible (in direction of transmission).
�
Get the file Download here
Subscribe to:
Posts (Atom)