Get Paid To Promote, Get Paid To Popup, Get Paid Display Banner -->
Showing posts with label Car Manuals. Show all posts
Showing posts with label Car Manuals. Show all posts

Monday, March 15, 2010

Technical Bulletin, Diesel Fuel, COld Weather Conditioning for Driving at Temperatures Below 0 C

Short Description
Poor diesel engine performance in ambient air temperaturs below freezing 0 C (32F) can be caused by a condition known as diesel fuel clouding (gelling/waxing), a result of improperly winteried/conditioned diesel fuel provided by fuel suppliers. Water contamination in diesel full can also cause similar conditions as the result of ice accumulation in the vehicle�s fuel system.

Website: www.paul-fisher.com | Filesize: 46kb
No of Page(s): 5

Content
�
Service
To prevent the possibility of this condition occuring, recommend to diesel powered vehicle owners that a quality diesel fuel winerizer/conditioner be used during winter months. Volkswagen of America, Inc. recommends using Stanadyne One Shot Performance Formula All Season Diesel Fuel Conditioner in the correct amount per tank full of fuel as listed below.
CAUTION!
Do not use diesel fuel addtives containing alcohol! Alcohol will not address fuel clouding (gelling/waxing) conditions. Using alcohol will damage the diesel injection pump.
�

Get the file Download here

Technical Bulletin, Glove Box, Eliminating Squeaks/Rattles

Short Description
Condition
- Glove box door squeaks when opening and closing.
- Glove box rattles when closed while driving.

Website: www.postamatik.com | Filesize: 798kb
No of Page(s): 3

Content
Service
Glove box door, squeaking
� Release cover -1- with clips -2- from dash panel -3-.
� Pull out cover -1- in direction of -arrow-.
� Open glove box door until door damper (brake element) actuator rod for door -arrow� is fully extended.
� Lightly apply silicone spray to brake element actuator rod -arrow-.
� Open and close glove box door 5 to 6 times and ensure noise or squeak has been eliminated during glove box door operation.
�

Get the file Download here

Technical Bulletin, New VW ATF / 01M transmission, checking ATF level, changing ATF

Short Description
A new Volkswagen ATF (Automatic Transmission Fluid) is available. Only the new VW ATF must be used in all Volkswagen Phase II automatic transmissions (types 01M and 01P). These transmissions have been installed in production beginning in January 1995. VW ATF is a yellowish-colored fluid unlike the red Dexron II fluid used previously. Use Dexron II transmission fluid only for automatic transmissions in vehicles produced up to and including December 1994. VW ATF can also be used in these transmissions.

Website: www.diakom.ru | Filesize: 110kb
No of Page(s): 6

Content
�
ATF, changing
� Remove ATF level plug from oil pan (arrow).
� Remove overflow tube through the plug hole.
� Drain ATF.
� Install overflow tube.
� Screw level plug in hand-tight.
� Fill with 3 Liters of ATF through filler pipe.
� Start engine and shift through all selector lever positions with vehicle stationary.
�

Get the file Download here

Technical Bulletin Anti-theft Immobilizer On Board Diagnostic (OBD)

Short Description
Immobilize- electronic components and warning light function
The immobilize- electronics consist of:
- control electronics in instrument cluster
- a warning light fo- anti-theft immobilizer sensor -K117- in instrument cluster (speedometer display)
- a matched engine control module
- an induction coil on the ignition lock
- matched ignition keys with electronic components (transponder and response reade- memory)

Website: www.qclt.com | Filesize: 112kb
No of Page(s): 37

Content
�
Matching ignition keys
Note:
- If new or additional ignition keys are required they must be matched to the immobilizer control module.
- Note the procedure when changing the locking set and the immobilizer control module.
- The matching procedure must always be carried out for all the ignition keys, including the existing ones.
- The number of keys already matched will be displayed when the adaptation (matching) function is selected.
- If only one key is matched, the vehicle can be started immediately with this key. If more than one key has been matched, the vehicle can only be started immediately with the last key matched.
- The matching procedure can be interrupted by pressing the -C-button on the VAG 1551.
�

Get the file Download here